Home > Repeaters and base radios >

FR9010 - FR9020 Series 110W Full Duty Cycle P25 Digital Repeater



 
Alternative Views:


Our Price: $6,220.00

Product Code: FR9010


Configuration:
  

Optional Accessories:
  

Qty:  
Description Technical Specs Extended Information
 
The IC-FR9010 series is compatible with both analog FM mode and P25 digital mode. Available to program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and P25 digital modes and to transmit either mode depending on the received signal. The 4×20-characters display, 16 key buttons, 500 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. The bar graph display shows the S-meter level and output power level. The IC-FR9010 series has a programmable D-SUB 25-pin accessory connector for connecting external remote control devices. Also, modulation/ demodulation signals can be input/output from the D-SUB connector. The IC-FR9010 series decodes analog CTCSS and DTCS and digital NAC (Network Access Code) on a per channel basis and downlinks these with the received signal when required. As a P25 conventional base mode, the following P25 functions are programmable. (Conventional base mode only) Emergency, Call alert, Radio check, Radio inhibit (Stun), Radio uninhibit (Revive), Status update, Status request, SBC log (Call log)

Models Available:

Model

Description

FR9010 11

146-174 MHz 110W P25 repeater

FR9020 11

440-475 MHz 100W P25 repeater

Features
  • P25 conventional, analog FM and mixed mode
  • 500 memory channels capacity
  • P25 conventional base mode:
  •  Emergency
  •  Call alert
  •  Radio check
  •  Radio inhibit (Stun)
  •  Radio uninhibit (Revive)
  •  Status update
  •  Status request
  •  SBC log (Call log)
  •  OTAR (Over-the-Air-Rekeying)
  •  Individual, group and all calls
  • D-SUB 25-pin accessory connector
  • Programmable CTCSS, DTCS and NAC
  • CW ID transmission
  • High reliability, rugged construction
  • ±1.5ppm frequency stability (Digital mode)
  • Low standby current (280mA)
  • P25 self-test mode and key test mode
  • Automatic error detection
  • 5 color LEDs
  • 2U low profile for rack mount
  • CW ID transmission
  • High reliability, rugged construction
  • ±1.5ppm frequency stability (Digital mode)
  • Low standby current (280mA)
  • P25 self-test mode and key test mode
  • Automatic error detection
  • 5 color LEDs
  • 2U low profile for rack mount

Share your knowledge of this product. Be the first to write a review »