With an integrated AIS receiver, the IC-M506 can show AIS vessel traffic information on the display. The AIS target call function allows you to easily set up an individual DSC call. The Plotter, Target list and Danger list can be toggled on the display. With the plug-and-play functionality of NMEA 2000, the IC-M506 can easily connect to a NMEA 2000 network and interconnect with other equipment. Also the NMEA 0183 input/output can be used for external GPS/NAV interface. The last call voice recording function automatically saves the last two minutes of the last incoming call. You can also start recording manually. The built-in bi-directional active noise canceling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. When connected to an external hailer horn, you can talk to people on the deck or shore from the radio’s microphone and can hear people’s reply via the hailer horn. Foghorn and RX speaker functions are also available. The optional COMMANDMIC, HM-195B/SW provides 2nd station capability for using the IC-M506 from a separate cabin or tower. Most functions including DSC and AIS functions can be controlled from the COMMANDMIC and can be used as an intercom between the IC-M506 and the COMMANDMIC. The IC-M506 is equipped with 132×96 pixels dot matrix display, which is larger than the IC-M504 (132×64 pixels). Reading GPS, AIS, DSC and radio menus are easier than ever. The bottom line of the display shows the software key functions and the functions can be toggled with the left and right buttons.
AIS Plotter
AIS Target List
Channel and Position
- Frequency range TX 156.025–157.425MHz, Rx 156.050–163.275MHz, CH70 AIS1, 2 156.525MHz, 161.975MHz, 162.025MHz
- Type of emission 16K0G3E (FM), 16K0G2B (DSC)
- Usable channels USA, INT, CAN, and WX channels
- Power supply requirement 13.8V DC ±15%
- Current drain (at 13.8V DC) Transmit Receive 5.5A (25W output) 1.5A
- Operating temperature range –20°C to +60°C; –4°F to +140°F
- Antenna impedance 50Ω (SO-239)
- Dimensions (W×H×D)(projections not included) 175×110×TBA mm; 6.66×3.14×TBA in.
- Weight (approx.) TBA
- NMEA formats Input Output RMC, GGA, GNS, GLLDSC, and DSE
- Transmitter Output power 25W or 1W (at 13.8V DC)
- Max. Freq. deviation ± 5.0 kHz
- Frequency stability ± 10.0ppm (–20°C to +60°C)
- Spurious emissions Less than -70dBc
- Residual modulation More than 40dB
- Adjacent channel power more than 70dB
- Receiver Intermediate frequency 1st 21.7MHz, 2nd 450kHz
- Sensitivity (at 12dB SINAD) 0.22µV typical
- Squelch sensitivity less than 0.32µV
- Adjacent Ch. selectivity 80dB typical
- Spurious response 80dB typical
- Intermodulation rejection 80dB typical
- Hum and noise ratio more than 40dB
- Audio output power at 10% distortion 10W min. with a 4Ω load (External speaker)
Supplied Acessories
Hand microphone, HM-205B/RB
DC Power Cable
Mounting Bracket Kit
|