Dataradio Integra-TR UHF/VHF Wireless Modem

Integra-TR is a high-speed transparent integrated wireless modem. It is FCC refarming compliant anddesigned specifically to fit the needs of SCADA, telemetry and control applications. Integra-TR provides the communication links to data equipment for installations where wired communication is impractical. Integra-TR works with most makes and models of remote terminal units (RTU) and programmable logic controllers (PLC) and their protocols. Configuration settings allow tailoring for a variety of applications. Integra-TR supports:
1. Point to point Master-Remote or Peer-to-Peer configurations in simplex or half-duplex modes.
2. Point to multipoint Master-Remote configuration in simplex or half-duplex modes and offers full-duplex indual-unit configuration. Settings and connections for these configurations are given later in this manual.

CHARACTERISTICS:

·         Selectable network speeds of 2400 and 4800 b/s for quarter channel units, 4800 and 9600 b/s for half channel units as well as 4800, 9600 and 19200 b/s for full channel units

·         Backward compatible with the Integra-T for bit rate of 4800 and 9600 b/s (full channel units only) One COM port for connection to DTE. Speed of 1200 - 19200 baud

·         One Setup port for configuration and diagnostics (speed fixed to 9600 baud, 8 bit, no parity, 1 stop bit)

·         Built-in 5-watt transceiver (adjustable 1-5 watts), operating in the VHF, UHF or 900 MHz communications bands. Half-duplex or simplex operation

·         Fully transparent operation with error-free data delivery

·         Allows transmission of “break” characters

·         DOX (Data Operated Transmit) or RTS mode

·         Stations may be set as “master” or “remote” to prevent remote stations from hearing each other in a simplex RF configuration

·         Full local and remote diagnostics

·         Two configurable I/O lines programmable as either 8-bit analog inputs or digital outputs

·         12 VDC, negative ground” device

·         CWID provides the ability to program the unit to periodically identify itself on the air by sending the FCC Station ID in Morse code

·         Disable Tx w/Carrier Present configures the unit to prevent transmission when the radio channel is busy

·         Low power consumption modes: “sleep” and “suspend” modes (< 20 mA)

·         Multi-channel capability under system PLC control provides advanced network monitoring