Dataradio Viper
IP Router for Licensed Spectrum
Dataradio Viper IP Router & Radio Modem for Licensed Spectrum Narrow band. This software defined radio provides IP connectivity to UHF, VHF, 900 MAS channel - and now 220 MHz spectrum. Field of use are TCP/IP, Security & Defense, Oil & Gas, Scada & Telemetry, Wireless Data Communication, Remote Monitoring, Industrial Automation, Water and Wastewater, Electric Utilities. You've never seen anything like this one of a kind router that delivers IP data over a licensed frequency. Our enhanced design allows simultaneous communications using both RS-232 and Ethernet ports! All that and its RoHS compliant too!
There will be 1-3 weeks lead time on this product.
Viper SC provides any IP enabled device with connectivity to transmit data. This DSP‐based radio was designed for industrial applications utilizing 136-174 MHz, 215-240 MHz VHF, 406.1-512 MHz UHF, and 928‐960 MHz frequencies. Operational as a wideband IP Modem or Router, Viper SC is optimized for use in SmartGrid, Distribution Automation, and SCADA applications. SCADA applications are defined as those with one or more centralized control sites used to monitor and control remote field devices over wide areas. For example, a regional utility may monitor and control networks over an entire metropolitan area. Industry sectors with SCADA systems include energy utilities, water and wastewater utilities, and environmental groups.
Designed to replace wire lines, the Ethernet and RS‐232 serial ports allow direct connection to Programmable Logic Controllers (PLCs) or Remote Terminal Units (RTUs). Viper supports serial and Ethernet/IP Remote Terminal Units (RTU) and programmable logic controllers (PLC). It is standard IEEE 802.3 compliant. Viper supports any protocol running over IPv4 (including ICMP, IPinIP, IPSec, RSVP, TCP and UDP protocols). It provides MAC layer bridging and HTTP, ARP, and static routing packet forwarding.
Viper operational characteristics:
· Frequency range of 136-174 MHz, 215-240 MHz, 406.1-470 MHz, 450-512 MHz, or 928-960 MHz
· 406.1-470MHz frequency range certified for European Union (ETSI EN300 113)
· 406.1-470MHz and 450-512 MHz frequency ranges certified for Australia/New Zealand
· User-selectable data rates – up to 128 kbps @ 50 kHz
· Wide input power range of 10 to 30 volts DC
· Built-in transceiver adjustable from 1 to 10 watts (8 watts max for 900MHz)
· Used as an access point or an end point with each configurable in (a) Bridge mode for quick setup of units on same network or (b) Router mode for advanced networks
· Embedded web server to access status and/or setup information
· Remote access for over‐the‐air system firmware upgrades
· Advanced AES 128‐bit data encryption and security designed to meet FIPS 140‐2 requirements
· Superior data compression (zlib compression algorithm applies to Serial and IP connections)
· Native UDP and TCP/IP support
· Online and Offline Diagnostics
· Supports up to 32 different frequency channel pairs
· Rugged die‐cast aluminum and steel case
· UL Certified when powered by a listed Class 2 source
Viper SC IP Router Brochure
Sign In
