Icom IC-FR4000 UHF 450-480 MHz (out of band programming and alignment are available). FM Repeater 50 Watt continuous full duty cycle operation. This repeater looks as good as it performs. Includes Power Supply and Battery Backup.
Specifications
| General |
|
Frequency coverage (MHz)
IC-FR3000
IC-FR4000
|
148-172MHz, 150-174MHz
450-480MHz
|
| No. of channels |
32 channels |
| Channel spacing |
12.5/25KHz |
| PLL channel step |
5, 6. 25KHz (2.5kHz, VHF repeater operation only) |
|
Frequency stability
VHF
UHF (U.S.A. version)
UHF (Other versions)
|
±2.5ppm
±1.5ppm < /br> ±2.5ppm
|
| Operating temperature range |
-30°C to +60°C
-22°F to +140°F
|
|
Power supply voltage
|
13.6V DC
100-120V AC (50/60Hz)*,
220-240V AC (50/60Hz)*
*Depending on version
|
|
Current drain (at 13.6 V DC)
Tx
Rx
|
VHF (at 50W)
UHF (at 50W)
Max. audio
Stand-by |
15A
20A
2A typ.
1A typ.
|
|
| Antenna impedance |
50Ω (Type-N × 2) |
| Dimensions (proj. not incl.) |
410(W) × 110(H) × 360(D) mm
16 5⁄32 × 4 11⁄32 × 14 3⁄16 in
|
| Weight |
12 kg; 26.4lb (approx.) |
| Transmitter |
| Output power |
50W (high), 10W (low) selectable (at 13.6V DC) |
| Max. frequency deviation |
±5.0kHz/±2.5kHz (wide/narrow) |
| Spurious emissions |
70dB |
| Adjacent channel power |
70/60dB (wide/narrow) |
| Hum and noise |
40/34dB (wide/narrow) |
| Microphone impedance |
600 ohm (8-pin modular) |
| Receiver |
| Sensitivity |
0.25µV typ. (at 12dB SINAD) |
| Adjacent channel selectivity |
70/60dB (wide/narrow) |
| Spurious response |
70dB |
| Intermodulation rejection ratio |
70dB |
| Hum and noise ratio |
40/34dB (wide/narrow) |
| Audio output power |
2.5 W typ. at 10% distortion with a 4 ohm load |
| External speaker connector |
2-conductor 3.5 (d) mm (1⁄8″)/4Ω |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and pased the following MIL-STD requirements and strict environmental standards.
|
Standard
|
MIL 810C |
MIL 810D |
MIL 810E |
MIL 810F |
| Method |
Proc. |
Method |
Proc. |
Method |
Proc. |
Method |
Proc. |
| High Temp. |
501.1 |
I |
501.2 |
I, II |
501.3 |
I ,II |
501.4 |
I, II |
| Low Temp. |
502.1 |
I |
502.2 |
I, II |
502.3 |
I, II |
502.4-3 |
I, II |
| Vibration |
514.2 |
VII, X |
514.3 |
I |
514.4 |
I |
514.4 |
I |
| Shock |
516.2 |
I, II, IV |
516.3 |
I, IV |
516.4 |
I, IV |
516.5 |
I, IV |
Measurements made in accordance with EIA/TIA-603-A. Compatibility of functions for use with a telephone line may not work in some countries. All stated specifications are subject to change without notice or obligation.
Manufacturer: Icom
SKU: FR4000
Sign In
