The Viper Base Station uses a single radio to transmit and receive data from remote radios and has a main controller PC board which is accessible via HTML web pages. Access the Controller’s web pages to configure the user programmable settings and to view the status of the Base Station. The Viper Base Station is housed in a rugged, 19" rack mountable, aluminum case. Built for industrial applications in a variety of environments, The Viper Base Station operates over an extended temperature range and provides worry-free operation in the roughest environments.
There will be 1-4 weeks lead time on this product.
BASE STATION SPECIFICATIONS
|
These specifications are typical and subject to change without notice.
General |
|
Power Source
|
11-30 VDC, Negative GND
|
|
RF Impedance
|
50 Ω
|
|
Operating Temperature
|
-30° to + 60° C
|
|
Storage Temperature
|
-40° to + 85° C
|
|
Operating Humidity
|
5% to 95% non-condensing RH
|
|
Rx Current Drain at 25°C with one Viper powered.
|
DC Input 11V
|
DC Input 20V
|
DC Input 30V
|
|
All Relays On
All Relays Off
|
1.7 A (max)
1.5 A (typ)
1.3 A (typ)
|
1.2 A (max)
945 mA (typ)
925 mA (typ)
|
760 mA (max)
646 mA (typ)
622 mA (typ)
|
|
Tx Current Drain at 25°C with one Viper powered.
|
Power Out
|
DC Input 11V
|
DC Input 20V
|
DC Input 30V
|
|
Tx Pwr: Max
All Relays On
All Relays Off
|
6.7 A (max)
4.5 A (typ)
4.3 A (typ)
|
4.7 A (max)
3.1 A (typ)
2.9 A (typ))
|
2.9 A (max)
1.9 A (typ)
1.7 A (typ)
|
|
Tx Pwr: 1W
All Relays On
All Relays Off
|
2.6 A (max)
2.1 A (typ)
1.9 A (typ)
|
1.7 A (max)
1.4 A (typ)
1.2 A (typ)
|
1.1 A (max)
880 mA (typ)
860 mA (typ)
|
|
Cold start
|
60 seconds
|
|
Nominal Dimensions
|
Chassis: 16" W x 4.75" H x 11.375" D (41 x 12 x 29 cm)
Front Panel: 19" x 5.22" x 0.25" (48 x 13 x 0.6 cm)
|
|
Shipping Weight
|
Standard: 11.5 lbs. (5.2 kg) Repeater/Redundant: 15 lbs. (6.8 kg)
|
|
Mounting Options
|
19" Rack Mount
|
|
RF Specifications
|
See radio specifications and user manual
|
|
FCC / IC Certifications
|
See radio specifications and user manual
|
|
Display
|
|
12 Status LEDs (Standard)
17 Status LEDs (Redundant)
|
Controller LEDs: Power, Status, Fan Error
Data LEDs: COM Data, Setup Data, Link/Act 1, Link/Act 2
Radio LEDs: Tx, Power, Error, Link/Act
Other: Alarm Disabled, Manual Override (Redundant Models only)
|
|
Connectors
|
|
Antenna Connector
|
N Female (Tx/Rx)
|
|
Serial Setup Port
|
DE-9F
|
|
Serial Com Port
|
DE-9F
|
|
Ethernet RJ-45
|
Two 10/100 BaseT auto-MDIX
(The 2 Ethernet connections are connected internally to each other and to the radio(s) with an embedded Ethernet Switch.)
|
|
Main Power
|
Power Header
|
Power Plug
|
|
4 Pin, 5.08mm, Power Header
|
4 Pin, 5.08mm
Power Header Cable: 60 inches
Connections:
Aux Power A
Ground
|
Manufacturer: CalAmp
SKU: VIiper-SC Base Station